Descriere
Caracteristici
- Conectivitate Ethernet, WiFi
- Imprimare de pe stick USB
- Grosime a stratului de până la 20 microni
Specificații
Tehnologie specifică | LCD DLP |
Volum de imprimare (l) | 1,0 |
Dimensiuni de imprimare (mm) | 119x65x160 |
Grosime strat (mm) | 20-50 |
Sursă de lumină | LED UV, 405 nm, 25 W |
Ecran de expunere | LCD 2560x1440 px, 47 µm |
Materiale compatibile | Rășină fotopolimerică UV |
Afișaj | LCD Color 3,5" |
Comandă | Touch |
Conectivitate | Ethernet, WiFi |
Suport media extern | Stick USB |
Software | Creality 3D Creator |
Compatibilitate OS | Windows |
Format fișiere | stl |
Alimentare | Adaptor rețea extern, 12 V / 10 A |
Dimensiuni (mm) | 221x221x403 |
Masă netă(kg) | 7 |
Dimensiuni pachet (mm) | 295x295x545 |
Masă pachet (kg) | 9 |
LD-002R LCD Resin 3D Printer Features
BUILD AND MOTION: Great emphasis is being placed on the LD-002R’s robust build quality and the components of its motion system, which is underpinned by a ball screw and single linear rail for the Z-axis.
ANTI-ALIASING: MSLA 3D printers use an LCD screen to mask an image of a layer over a UV light source. Comprised of hundreds of thousands of pixels, each a little rectangle itself, this tech leaves a telltale sign of the edges of these pixels on the print surface. Often barely visible, this effect can be lessened through the use of a digital processing called anti-aliasing, which interpolates between these edges, smoothing the effect out.
QUICK LEVELING: Quick leveling in the sense that the machine will lower the print plate to the vat for you, yes the LD-002R is quick leveling. Four hex screws feature on the print plate — loosen them before dropping the plate, and it will align to the level of the screen. Tighten and you’re good to go. Standard MSLA fare.
PERFORATED PRINT PLATE: Something of an oddity on a small desktop MSLA machine, the Creality LD-002R 3d printer has a perforated print plate. Typically seen on larger bottom-up machines where larger prints present additional pull that might dislodge an improperly adhered print, it’s unusual, and perhaps even distracting overkill, to see it on a smaller machine. It’s not a bad thing, but it makes you wonder why they did it.
AIR FILTER: A small box at the rear of the print chamber contains a pouch of activated carbon. This should help to remove part of the stench of exposed resin from the air.
IMPORTANT!
Prețul nu include servicii de instalare, punere în funcțiune și/sau instruire.
GARANȚIE
Garanția oferită pentru produs este de 24 luni pentru persoane fizice și 12 luni pentru persoane juridice și se referă la produs în integralitatea lui.
Unele elemente din componența produsului pot face obiectul unei garanții limitate, în conformitate cu condițiile de garanție specificate de producător în documentele care însoțesc produsul sau pe site-ul producătorului.
NOTĂ
Informațile prezentate sunt furnizate de producător, dar pot fi schimbate de acesta fără ca noi să avem posibilitatea să le actualizăm în timp real.
Vă recomandăm să vizitați întotdeauna și site-ul producătorului.
Detalii produs
Produse similare



















