Filament Virtual Foundry MIM/CIM

Description

Aluminum 6061 Filamet

Aluminum 6061 Filamet™ contains 60% - 65% metal and has a density of 1.5g/cc - 1.54g/cc. Filamet™ enables any Fused Filament Fabrication printer to produce metal objects. Once fired in a sintering furnace, the result is 100% metal.

3D Printer setup: Visit our Use Instructions page for full printing and polishing guidelines.

Bronze Filamet

Bronze Filamet™ contains 88% - 90% metal and has a density of 4.29g/cc - 4.5g/cc.
Filamet™ enables any Fused Filament Fabrication printer to produce metal objects. Once fired in a sintering furnace, the result is 100% metal.

Copper Filamet

Copper Filamet™ contains 89% - 90% metal and has a density of 4.5g/cc - 4.7g/cc.
Filamet™ enables any Fused Filament Fabrication printer to produce metal objects. Once fired in a sintering furnace, the result is 100% metal.

High Carbon Iron Filamet

High Carbon Iron Filamet™ contains around 80% metal and has a density of 2.75g/cc. Filamet™ enables any Fused Filament Fabrication printer to produce metal objects. Once fired in a sintering furnace, the result is 100% metal. High Carbon Iron Filamet™ is highly ferromagnetic both before and after sintering.

Inconel® 718-34 Filamet

Inconel® 718-34 Filamet™ contains around 86% metal and has a density of 3.98g/cc. Filamet™ enables any Fused Filament Fabrication printer to produce metal objects. Once fired in a sintering furnace, the result is 100% metal.

Rapid 3DShield Tungsten Filament

Rapid 3DShield Tungsten Filament contains 92-95% metal and has a density of 7.8g/cc. This metal filament enables any Fused Filament Fabrication printer to produce metal objects.

Stainless Steel 17-4 Filamet

Stainless Steel 17-4 Filamet™ contains around 70% metal by mass and has a density of 3.0g/cc. Filamet™ enables any Fused Filament Fabrication printer to produce metal objects. Once fired in a sintering furnace, the result is 100% metal.

Stainless Steel 316L Filamet

Stainless Steel 316L Filamet™ contains around 85% metal by mass and has a density of 3.5g/cc. Filamet™ enables any Fused Filament Fabrication printer to produce metal objects. Once fired in a sintering furnace, the result is 100% metal.

Titanium 64-5 Filamet

Titanium 64-5 Filamet™ contains around 80% metal and has a density of 2.46g/cc. Filamet™ enables any Fused Filament Fabrication printer to produce metal objects. Once fired in a sintering furnace, the result is 100% metal.

Carbon Fiber Filamet

Carbon Fiber Filamet™ is made of TVF's signature binder combined with around 7% carbon fiber. This filament enables any Fused Filament Fabrication printer to produce carbon fiber objects.

Amaco 46-D Ceramic Clay Filamet

Amaco 46-D Ceramic Clay Filamet™ contains around 40% clay. Ceramic Filamet™ enables any Fused Filament Fabrication printer to produce ceramic objects. Once fired in a kiln, the result is 100% ceramic.

Amaco White 25-D Ceramic Clay Filamet

Amaco White 25-D Ceramic Clay Filamet™ contains around 40% clay. Ceramic Filamet™ enables any Fused Filament Fabrication printer to produce ceramic objects. Once fired in a kiln, the result is 100% ceramic.

Amaco X-23 Ceramic Clay Filamet

Amaco X-23 Ceramic Clay Filamet™ contains around 40% clay. Ceramic Filamet™ enables any Fused Filament Fabrication printer to produce ceramic objects. Once fired in a kiln, the result is 100% ceramic.

Zirconium Silicate Filamet

Zirconium Silicate Filamet™ contains around 60%(Zircopax®) Zirconium Silicate. Ceramic Filamet™ enables any Fused Filament Fabrication printer to produce ceramic objects. Once fired in a kiln, the result is 100% ceramic.

Sintering Refractory Ballast - Al2O3

Refractory ballast for firing Filamet™ materials in a vacuum. May be used alone or combined with Powdered Graphite. Stainless Steel 316L and High Carbon Iron Filamet™ require an oxygen-free environment. Copper and Bronze Filamet™ may be fired in an open environment. In this case, use Magic Black Powder to shield the print from oxygen. 

Sintering Refractory Ballast - Magic Black Powder

Refractory ballast for firing Copper and Bronze Filamet™ materials in an open environment kiln. 

Mix Magic Black Powder with water, then place the print in the mixture, ensuring the entire print and all surfaces are completely covered and any protruding areas are fully supported. The print must be fully surrounded by the refractory.

Copper and Bronze Filamet™ may be fired in an oxygen-free environment. In this case, use Powdered Graphite and/or Al₂O₃ to support the print's shape. 

Sintering Refractory Ballast - Powdered Graphite

Refractory for firing all Filamet™ materials in a vacuum or inert environment kiln. May be used alone or combined with Al₂O₃. 

Place the print in this refractory, ensuring the entire print and all surfaces are completely covered and any protruding areas are fully supported. The print must be fully surrounded by the refractory.

Stainless Steel 316L Filamet™ requires an oxygen-free environment. Copper and Bronze Filamet™ may be fired in an open environment. In this case, use Magic Black Powder to shield the print from oxygen.

NOTĂ

Informațile prezentate sunt furnizate de producător, dar pot fi schimbate de acesta fără ca noi să avem posibilitatea să le actualizăm în timp real.
Pentru mai multe caracteristici și informații actualizate, consultați site-ul producătorului.