Anisoprint Composer A3
Descriere
Anisoprinting technology is a new solution for the production of optimized composite parts and structures with the demanded physical and mechanical properties.
The solution is based on patent pending Composite Fiber Coextrusion (CFC) technology. Different thermoplastic polymers can be reinforced with continuous fibres, consolidated and cured within a single-stage fully automated process that does not require post processing or tooling. The two-matrix (thermoset+thermoplastic) approach ensures low porosity, good adhesion of fiber to polymer, superior mechanical properties.
With Composer you can print end-use parts that are stronger, lighter and cheaper than their counterparts from the other materials (metal, plastic, non-optimized composites)
| Build area size |
460 mm х 297 mm х 210 mm |
|
Printing technology |
Fused Filament Fabrication (FFF) Composite Fiber Co-extrusion (CFC) |
|
Min. layer thickness |
60 µm |
|
Printhead |
Dual nozzle (FFF extruder; CFC extruder with reinforcing fiber cutting device) |
|
Nozzle diameter, FFF |
0.4 mm |
|
Print speed, FFF |
10 mm/sec – 80 mm/sec |
|
Print speed, CFC |
1 mm/sec – 10 mm/sec |
|
Plastic filament diameter |
1.75 mm |
|
Compatible plastics |
Plastics with processing temperatures up to 270°С |
|
Reinforcing fiber |
Anisoprint CCF-1.5k, CBF |
|
Buildplate surface |
Glass |
Temperature
|
Max. printhead operating temperature |
270°С |
|
Max. buildplate operating temperature |
60°С (up to 120°С with open print chamber) |
Software
|
Slicer |
Anisoprint Aura (FFF+CFC), Cura, Slic3r (only FFF) |
|
OS support |
Windows 7+ |
Interfaces
|
Connectivity |
SD-card slot, USB-Type B |
|
LCD |
4.3'' touchscreen |
Power requirements
|
Voltage |
220-240 V (optionally 100-120 V) |
|
Frequency |
50/60 Hz |
|
Maximum consumption |
1000 W |
Physical characteristics
|
Net Weight |
65 kg |
|
Printer size (LxWхH) |
720 mm х 630 mm х 490 mm |
|
Gross Weight |
83 kg |
|
Package size (LxWхH) |
1050 mm х 760 mm х 630 mm |
